Related Manuals for Black & Decker ProXpress F611
Summary of Contents for Black & Decker ProXpress F611
- Page 1 SAVE THIS USE AND CARE BOOK ProXpress ™ ™ Automatic Shut-Off Iron 800-231-9786 QUESTIONS? Please call us TOLL FREE! Monday - Friday 8:15 a.m. - 5:00 p.m. Eastern Time. MODEL F611...
-
Page 2: Important Safeguards
I Read all instructions. I Use iron only for its intended use. I To protect against a risk of electric shock, do not immerse the iron in water or other liquid. I The iron should always be turned to O/FILL before plugging into or unplugging from an outlet. -
Page 3: Polarized Plug
† DuPont SilverStone ® premium No-Stick surface This ProXpress™ Automatic Shut-Off Iron has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. -
Page 4: How To Use
THE IRON SPRAY STEAM SETTINGS Important: Follow this procedure to clean the iron and to become familiar with its features. Remove any labels or tags which may be attached. Using the Water Fill Cup we have provided, fill the Water Tank about 1/3 full with water. -
Page 5: Filling With Water
180 parts per million) consider using distilled or demineralized water. If using distilled or demineralized water, tap water should be used the first time you use the iron and once per month thereafter to maintain steam performance. STARTING THE IRON Figure B Plug in the iron. - Page 6 Figure C Figure D Figure E If the iron is turned on and left sitting motionless in the Heel Rest position for 9 minutes, the TEMPERATURE READY Light will flash to alert you it’s about to shut itself off. If unmoved for 1 additional minute, it will shut itself off completely.
-
Page 7: Storing The Iron
(Figure G) It is not necessary to empty the water if the iron is used frequently, but the iron must be stored on its Heel Rest to prevent water leaking from the Soleplate and causing damage to... -
Page 8: Fabric Ironing Chart
TEMP. Dry iron on wrong side. Press washables while damp. Dry iron on wrong side to prevent shine. Press washables while damp. Dry iron washables while fabric is damp. Iron rayon fabrics on the wrong side. Steam iron if fabric manufacturer directs. -
Page 9: Self-Cleaning
Never use abrasive, heavy-duty cleansers or scouring pads. After cleaning, steam iron on an old, cotton terry cloth towel for approximately 2 minutes. About once a month use the Self Clean feature to flush out water, minerals, and lint. -
Page 10: Need Help
2 minutes to dry out any remaining water. Iron over an old towel. Cool as usual. Is the PUSH ON LIGHT on? Push in to turn iron on. If the Light is not on, will a lamp plugged into the outlet turn on? -
Page 11: Service Or Repair
COMING FROM STEAM VENTS? SERVICE OR REPAIR Is the PUSH ON Light on and has the iron heated for about 2 minutes? Is the Temperature Selector Dial set in a steam area and is the Adjustable Steam Dial set at the corresponding , or Service, if necessary, must be performed by a Black &... -
Page 12: Two Year Warranty
The automatic shut-off system in this iron has a switch which contains a small amount of mercury. This iron must not be placed in the garbage until the mercury switch has been removed for recycling. Please help Black & Decker protect the environment by returning this iron to any Black &...