Declaration Of Incorporation, Declaration Of Conformity; Declaration Of Incorporation - Siemens Worm Gearbox S 5 BA 2012 Operating Instructions Manual

Declaration of Incorporation, Declaration of
Conformity
12.1

Declaration of Incorporation

Declaration of Incorporation according to Directive 2006/42/EC Annex II 1 B.
The manufacturer Siemens AG, 72072 Tübingen, Germany, declares for the partly
completed machine MOTOX worm gearbox S.08, S.18, S.28:
The special technical documentation was generated according to Annex VII B.
The following essential health and safety requirements from Directive 2006/42/EC Annex I
apply and have been fulfilled:
● 1.1, 1.1.2, 1.1.3, 1.1.5
● 1.2.4.4, 1.2.6
● 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.6, 1.3.8.1
● 1.4.1, 1.4.2, 1.4.2.1
● 1.5.1, 1.5.2, 1.5.4, 1.5.5, 1.5.6, 1.5.8, 1.5.9, 1.5.10, 1.5.11, 1.5.13, 1.5.15
● 1.6.1, 1.6.2
● 1.7.1, 1.7.1.1, 1.7.2, 1.7.3, 1.7.4, 1.7.4.1, 1.7.4.2, 1.7.4.3
The partly completed machine may only be commissioned once it has been established, if
applicable, that the machine in which the partly completed machine is to be incorporated
meets the provisions of Directive 2006/42/EC.
The manufacturer is obligated to transmit the special technical documentation for the partly
completed machine in electronic form to national authorities upon legitimate request.
Person authorized to compile the relevant technical documentation: Georg Böing, Head of
Research and Development Gears.
Tübingen, March 1, 2013
Georg Böing
Head of Research & Development Gears
BA 2012
Operating Instructions, 03/2013, 70000004024300
Lothar Hirschberger
Head of Quality Management
12
49