Troubleshooting; Specifications - Tanita TBF-612 Instruction Manual

Tanita corporation instruction manual body fat monitor/scale tbf-612
Table of Contents

Advertisement

If the following problems occur...
• "st-lb" or "kg" appears while taking a
weight measurement.
• Nothing appears in the display screen after
initial display.
• Nothing appears when the Personal key
is pressed, or
the display shows "- - - - -" and goes off
when the Personal key is pressed.
• The body fat percentage measurement
does not appear after the weight
is measured.
• The body fat percentage measurement
is extremely low/extremely high.
Specifications
TBF-612
Weight Capacity
300 lb (136 kg) (21 st-6 lb)
Weight Increments
0.5 lb (0.2 kg) (0.5 lb)
Fat Percentage
1%
Power Supply
DC 6V AA-size (UM3-type) battery (x4)—included
Power Consumption
60 mA maximum
Measuring Current
50 kHz 500 µA
UPC No
TBF-612-DG (Dark Grey) 742496-166210

Troubleshooting

Then...
The unit's "Weight Mode" has been set to measure your weight in units of stone-
pounds or kilograms. Refer to the Selecting the Weight Mode (lb, kg, or st-lb) on p.5
if you would like to change the setting back to pounds (lb).
Check foot alignment. Make sure you wait for "0.0" to appear before stepping on the
platform. Check to see that the batteries are fresh and are in the correct positions.
No data (gender or height) has been stored in the memory.
Vibration will interfere with measurement of the fat percentage. Be sure to stand erect
and still on the measuring platform. Do not bend your knees. Be sure that shoes and
socks are removed and check foot alignment. Step off and repeat steps on p.8.
Be sure you are measuring in the correct user mode (male or female), and that the soles
of your feet are clean and properly aligned with the guides on the measuring platform.
Dehydration, exercise, foot calluses, etc. can interfere with measurement of the fat
percentage. Step off and repeat steps on p.8.
After sales service
Please contact the store at which you bought this
monitor for any inquiry regarding operation or trouble,
request for repair and/or placement of an order for
parts or products. Or call 1-800-TANITA-8 (USA and
Canada only).
9

Advertisement

Table of Contents
loading

Table of Contents