A Few Words On Privacy; About Do Not Disturb; Want To Change The Alert Signal; Do Not Disturb - TANDBERG 150 MXP User Manual

Handling Incoming Calls (II)
A Few Words on Privacy
You may want to set up your system so that the
microphone and/or the camera are switched off
whenever you receive an incoming call.
By pressing
•
Microphone Off
the key and
•
the Camera Off key
you will prevent callers from hearing you and
seeing you without your control (press again to
reactivate).
To combine convenience and privacy, your
150MXP may be set up to automatically accept
an incoming call, but with the microphone
switched off. In this case you must switch the
microphone back on manually yourself (just
Microphone Off
press the key to reactivate a
disabled microphone).
You may also have your system set up so that
you always must answer all incoming calls
manually.
These settings are parts of the Adminstrator's
Guide
available. Your System Adminstrator, may
or may not, have password protection activated
to prevent unauthorized alterations of these and
other settings. If in doubt, consult your System
Adminstrator.
Whenever microphone and camera are disabled,
these icons appear on your screen:
A message will be sent to the far end
whenever you have disabled your
microphone and/or your camera.
An alternative to the above could be the
Do Not Disturb
use of the feature to the
right.
Table of Unpacking & Operating
Contents Installation Principles
D 14067.01
05.2007
About Do Not Disturb
There is a Do Not Disturb function available on
On
your system. When set to , all incoming calls
are blocked from your system.
Want to Change the Alert Signal?
You are not stuck with the audio signal alerting
you that an incoming call is on its way. This
Audio Settings
may be changed, see in the
Adminstrator's Guide .
Do observe, however, that these settings
may be password protected by your System
Adminstrator.
Making Making
Making
Video Calls Using Telephone
Calls Phone Book Calls

Outside a call, press the red Call Reject
key. A dialogue box will appear:

Press Reject to leave the menu, keeping
the feature deactivated.
1 1
2 2
abc abc 3 3
def def
4 4
5 5
ghi ghi 6 6
jkl jkl
mno mno
7 7
8 8
pqrs pqrs 9 9
tuv tuv
wxyz wxyz
0 0
a/A a/A

Use the Cursor keys to navigate and
to make your selection and proceed.
1 1
2 2
3 3
abc abc
def def
4 4
ghi ghi 5 5
jkl jkl 6 6
mno mno
7 7
pqrs pqrs 8 8 9 9
tuv tuv
wxyz wxyz
0 0
a/A a/A
Phone Book Incoming Incoming Calling More
Details Calls Calls

TANDBERG
Do Not Disturb

Press OK to activate the feature. The
screen will now turn black, and the
following text will appear:
Press any key to clear Do Not Disturb

When Do Not Disturb has been activated
and you receive an incoming call, the
following dialogue box will be produced:
Whenever Do Not Disturb
OK
the far end will be informed that the
called is busy.
Assume Do Not Disturb
activated. Choosing
when receiving an incoming call will
then do two things: It rejects the
incoming call (in the same way as choosing
Reject Do Not Disturb
), and sets the
functionality to On .
Video Meeting Contact
Than One Features Information
ENTRYPOINT
TANDBERG 50 MXP
USER GUIDE
USER GUIDE
is activated,
has not been
Do Not Disturb