Frame Start Trigger (Pulse Width Trigger); Trigger Software - Omron STC-MBE132U3V Product Specifications And User's Manual

7.2.2 Frame Start Trigger (Pulse Width Trigger)

When operating in this mode, the exposure synchronizes the trigger signal.
The exposure time can be controlled by the pulse width of Frame Start trigger.
When the polarity on the Line Inverter is positive (false), the exposure can be controlled at a period of High level
of input trigger signal.
When the polarity on the Line Inverter is negative (true), the exposure can be controlled at a period of Low level
of input trigger signal.
To operate the camera in this mode, the following settings have to be set.
・Exposure Mode: Trigger Width
・Trigger Selector: Frame Start
・Trigger Mode: On
(*) On Trigger Mode except Frame Start should be set Off.
Timing
トリガー入力(正極性)
トリガー入力(負極性)
露光
映像出力

7.2.3 Trigger Software

This function can apply either external signal or a software command as the trigger.
The software trigger can be applied through the "execute Trigger Software" command when the trigger is
selected on the Trigger Selector.
STC-MBE132U3V / MCE132U3V / STC-MCE132U3V-C
Product Specifications and User's Guide
Trigger Input
(Positive)
I/O Delay (tIPDLH) I/O遅延(tIPDLH)
Trigger Input
(Negative)
I/O Delay (tIPDHL)
I/O遅延(tIPDHL)
Trigger Delay
Exposure
VideoOut
LineDebounceTime
TriggerDelay
Exposure Start Duration inside of sensor
センサー内部の露光開始遅延
No.13S062-07
ExposureTime
25/53