One-Touch Timer Recording - Symphonic CWR20V4 Owner's Manual

Video
DVD-R DVD-R
DVD-RW DVD-RW
This is a simple way to set the
recording time in blocks of 30
minutes. Check that the disc you
are recording onto has enough
space for the time you set.
When the recording finishes the
recorder automatically goes into
standby.
First:
DVD
1
Turn on the unit and load a
recordable disc.
Make sure that the TV input is set
on the unit.
This operation may take a
while to be recognized.
2
Select a recording speed
using REC SPEED button.
Refer to "Recording speed" on
page 26.
3
Make sure that the recording
format is set to the desired
mode.
Refer to "Formatting a disc" on
pages 28-30.
When a DVD-RW disc is
loaded:
You can choose Video mode or
VR mode from SETUP menu.
"Video mode" has been selected
as the default. Refer to pages 28-
29 "Settings for the recording for-
mat to a blank disc."
When a DVD-R disc is loaded:
DVD-R discs will always be in
Video mode.
Recording

One-touch timer recording

VR
DVD-RW DVD-RW
4
Select a desired channel to
record using CH K / L but-
tons or number buttons.
5
Press REC/OTR button, then
press REC/OTR button
repeatedly until a desired
recording time (30 minutes
to 8 hours) appears on the TV
screen.
Recording will start.
I
0:30
(Normal Recording)
8:00
When reaches the specified time,
the unit will be turned off auto-
matically.
To cancel the one-touch timer
recording within the specified
time, press STOP C button.
This operation may take a
while to be completed.
2
5
0:30
1:00
7:30
OPEN/CLOSE
POWER
REC SPEED AUDIO
.@/:
ABC DEF
1 2 3
CH
GHI JKL MNO
4 5 6
PQRS TUV WXYZ VIDEO/TV
7 8 9
SPACE SLOW
0
DISPLAY VCR DVD PAUSE
PLAY
STOP
REC/OTR SETUP TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU RETURN
CLEAR/C-RESET ZOOM SKIP SKIP
SEARCH
CM SKIP
MODE
Note
• The remaining recording time
will appear on the display
panel during an OTR. Press
DISPLAY button to see it on
the TV screen.
• The unit will be turned off
automatically under the con-
ditions following.
1)No space remained on the
disc.
2)When a power failure
occurs.
• If OTR is finished in DVD
during playback or REC mode
in VCR, the DVD will be in
STOP mode and the VCR
keeps the current mode.
4
5
33