Additional Safety Instructions Applicable To Hole Punches; Battery Use And Care; Description; Product Overview - Hilti NPU 100 IP-A22 Manual

2.2

Additional safety instructions applicable to hole punches

Personal safety
▶ Use the product only if it is in perfect working order.
▶ Never tamper with or modify the tool in any way.
Electrical safety
▶ Before use of the power tool, all live cables or other items carrying electric voltage within the area in which
the user is working are to be switched off. If this is not possible, the corresponding safety precautions
for working in the proximity of live cables or equipment must be implemented and observed.
▶ Do not punch live parts.
Power tool use and care
▶ After punching approx. 30 to 40 consecutive holes, switch the power tool off and allow it to cool down
for about 15 minutes. Overheating can lead to damage to the power tool.
2.3

Battery use and care

▶ Observe the special regulations and instructions applicable to the transport, storage and use of Li-ion
batteries.
▶ Do not expose batteries to high temperatures, direct sunlight or fire.
▶ Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C.
▶ Do not use or charge batteries that have suffered mechanical impact, have been dropped from a height
or show signs of damage. In this case, always contact your Hilti Service.
▶ If the battery is too hot to touch it may be defective. In this case, place the product in a non-flammable
location, well away from flammable materials, where it can be kept under observation and allowed to
cool down. In this case, always contact your Hilti Service.
3

Description

3.1

Product overview

Punching head
@
Manual piston return switch
;
Casing
=
Servicing and fault indicator (red LED)
%
Battery release button
&
Printed: 29.10.2018 | Doc-Nr: PUB / 5436128 / 000 / 01
Battery
(
Slot on both sides to fasten the Hilti retain-
)
ing leash
White LED to illuminate the working area
+
Control switch
§
English 5