Specifications - Toto EcoPower Series Installation And Owner's Manual

Figure
Model Number
Rated Flush Volume
Toilet/Urinal type
Control stop inlet
Flush Valve inlet
Flush Valve outlet
Min
Supply water (Flowing)
pressure
Max*
(Static)
Shutoff pressure
Dimension of cover
Detection range
from the front
Detection time
Trap seal protection
Ambient temperature
Water temperature
NOTE:
The type of fixture determines the minimum pressure required for the valve. Consult
fixture manufacturer for the pressure requirement. TET6LA(R)(X), TET6GAR, and TET6UA(R)(X)
require 24" OR LONGER vacuum breakers. The valve will not have the proper detection range
if you use a shorter vacuum breaker.
* Water pressures over 80 psi are not recommended for most plumbing fixtures.
SPECIFICATIONS
Toilet
TET1LAR TET1UAR
TET1GAR
TET1LAX TET1UAX
TET6LAR TET6UAR
TET6GAR
TET6LAX TET6UAX
1.6 G 1.28 G 1 G
(6 L) (4.8 L) (3.8 L)
Flush Valve type bowl
1"NPT
15 psi 35 psi
(103 kPa) (241 kPa)
125 psi 125 psi
(862 kPa) (862 kPa)
7" (H) x 4-9/16"(W) x 3-3/16"(D)
(178 mm (H) x 115 mm (W) x 81 mm (D))
Automatic flush every
24 hours of non-use
4
Urinal
TEU1LAR
TEU1GAR
TEU1LAX
fuzzy logic
0.5 G (1.9 L)
adj. flush vol.
0.5 G (1.9L)
typical flush vol.
1.0 G (3.8 L)
Wash down flush
3/4"NPT
1-1/4"NPSM
1-1/2"NPSM
15 psi (103 kPa)
125 psi (862 kPa)
7 psi (48 kPa)
Within 33-1/2" (850 mm)
6 seconds
Automatic flush every
32-104˚F (0-40˚C)
34-104˚F (1-40˚C)
TEU1UAR
TEU1UAX
0.125 G (0.47 L)
12 hours of non-use