5.4.8.2
Diagnostics options during booting
Diagnostics while booting supplementary conditions
In the following supplementary conditions, the diagnostics window is displayed and booting of
the TCU is interrupted:
● When the <1 / F1> function is selected during booting
● When a warning message is displayed
● When a fault occurs
You can select functions <1 / F1> to <8 / F8> mentioned below by tapping on the Panel.
Alternatively, you can do this via the corresponding function keys of a connected USB
keyboard.
Using the <1 / F1> function
hin Client Bootloader
Boot Progress
BIOS Version
MAC Address
Hardware-ID
Network link
Boot from USB
IP Address
Netmask
DHCP Server
Boot Server
Image Metadata
Image Version
Linux Image (linux.bin)
Image Kind
Booting
<1/F1> protocol <2/F2> Readme_OSS
Key / text
F1 protocol
F2 Readme_OSS
F7 continue
F8 reboot
Operator panel front: OP 015 black
Manual, 05/2019, A5E35227814B AB
Meaning
Display detailed information
Details of the Open Source licenses
Continue booting of the TCU
Restart the TCU
5.4 Service and diagnostics
V05.00.45.00
V15.00.00.00
08:06:00:F1:F7:F8
7.9.2.0
1000MB, full duplex
no device found
192.168.214.14
255.255.255.0
192.168.214.1
192.168.214.1
71 bytes
V05.00.46.00
3295436 bytes
from boot server
ready
<7/F7> continue <8/F8> reboot
Networking
73