Table of Contents
Advertisement
Quick Links
Multi-function Jump Starter & Work Light
Cannon Tools Limited
Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
WARNING
Failure to follow instructions may
cause damage or explosion,
always shield eyes. Read entire
instruction manual before use.
CT4840
ORIGINAL INSTRUCTIONS
WARNING:
This product can expose you to chemicals
including Vinyl-Chloride, Styrene and Acrylonitrile,
which may cause cancer and birth defects or
other reproductive harm. Wash hands after handling.
To reduce risk of fire or burns, do not disassemble,
crush, puncture, short external contacts, or dispose
of in fire or water.
Advertisement
Table of Contents
Summary of Contents for Neilsen CT4840
- Page 1 Multi-function Jump Starter & Work Light CT4840 ORIGINAL INSTRUCTIONS Cannon Tools Limited Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K. WARNING: WARNING This product can expose you to chemicals including Vinyl-Chloride, Styrene and Acrylonitrile, Failure to follow instructions may...
-
Page 2: Ec Declaration Of Conformity
In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. Multi-function Jump Starter & Working Light Product description: CT4840 Model: Applicable EC Directives: EC-EMC Directive 2014/30/EU Harmonized standards... - Page 3 This unit has a sealed lithium-based battery that should be kept at full charge. Recharge when first received, immediately after each use, and every three months if not used. Failure to perform maintenance charges may cause the battery life to be reduced.
-
Page 4: Safety Summary
SAFETY SUMMARY LITHIUM BATTERY HAZARDS Lithium batteries are very energy dense and provide a high level of power to their respective applications. Care must be taken to properly manage all lithium batteries in their use, charging and storage to ensure safety for the operator and equipment serviced. -
Page 5: Personal Precautions
PERSONAL PRECAUTIONS Someone should always be within range of your voice or close enough to come to your aid when you work near a lead-acid battery. Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing or eyes. -
Page 6: Operation And Maintenance
OPERATION AND MAINTENANCE POWERLIGHT RESCUE Operating and Safety Features The POWERLIGHT RESCUE is an ideal power supply for powering and/or recharging small electronics connected through its USB power ports. With 12000 mAh of power, it can recharge multiple devices on a single charge. The POWERLIGHT RESCUE can serve as a vehicle jump starter when the included output cables and clamps are connected through the 12V cable port. - Page 7 Recharging Your POWERLIGHT RESCUE Charging via the included AC adapter. Never use any other charger than the one provide with the unit. Use of another charger can damage the internal Lithium battery, which could result in fire. 1. Connect the pin jack at the end of the AC adapter cord to the POWERLIGHT RESCUE through the input port marked “AC IN.”...
- Page 8 7. Clamp the negative (black –) clamp to the vehicle frame (ground). Note: Make sure the cables are not in the path of moving engine parts (belts, fans, etc.). 8. Once connected, the smart cable/clamp will provide an assessment of the connection.
- Page 9 Used as a USB Power Supply Your POWERLIGHT RESCUE can be used to power or recharge a wide variety of small electronic devices. 1. Connect your device’s charging cable to the device. 2. Connect the USB end of the charging cable into a POWERLIGHT RESCUE USB port.
-
Page 10: Troubleshooting
TROUBLESHOOTING Problem: I charged the unit when the LED indicated it was low, but after several hours, there is no change in status. Answer: Suspect a faulty charger. Problem: While charging, the four blue status LEDs light to indicate full charge has been reached. -
Page 11: Disposal Instructions
DISPOSAL INSTRUCTIONS Contains Lithium-based battery. Must be recycled/disposed of properly. The battery inside your POWERLIGHT RESCUE is a lithium-based battery and should be recycled or disposed of properly, as you would any electronic device containing an advanced technology battery. It is your responsibility to recycle or dispose of your POWERLIGHT RESCUE in accordance with your specific local, regional and national requirements.