Regeneration Of The Water Softening System; Rinse Aid System; Rinse Aid - Bosch SM Series User Manual

Press repeatedly until the display
2.
shows "Water hardness".
Press or
3.
display shows 0 - 6.
To save the settings, press
4.
approx. 3 seconds.
a The water softening system is
switched off and the salt refill indic-
ator is deactivated.
Overview of consumption values with regeneration the water softening
system
Here you can find an overview of the maximum additional running time and
consumption values during regeneration of the water softening system.
You can find the column applicable to your model in the quick reference guide
according to its water consumption in the Eco 50° programme.
Water consump-
tion in litres (de-
pending on
model)
6.5 / 6.7
7.5 / 7.7
9.5
above 10.5
The consumption values specified
are laboratory measurements determ-
ined in accordance with the currently
applicable standard and using the
Eco 50° programme and the factory
value of the water hardness is set to
16 - 20°E.
repeatedly until the
Regeneration of
the water soften-
ing system after
x rinse cycles
8
7
6
5
Regeneration of the water
softening system
In order to obtain fault-free function of
the water softening system, the appli-
for
ance performs reheating of the water
softening system at regular intervals.
Regeneration of the water softening
system takes place before the end of
the main rinse cycle in all pro-
grammes. It will increase the run time
and consumption values, e.g. water
and electricity.
Additional run-
ning time in
minutes
7
7
7
7

Rinse aid system

Rinse aid system
You can use the rinse aid system
and rinse aid to get tableware and
glasses rinsed perfectly without
marks.

Rinse aid

For optimum drying results, use rinse
aid.
Only use rinse aid for domestic dish-
washers.
Rinse aid system en
Additional water
consumption in
litres
5
5
5
5
Additional power
consumption in
kWh
0.05
0.05
0.05
0.05
33