Bosch Worcester Greenstar Utility 32/50 Installation, Commissioning And Servicing Instruction Manual page 4

Key to symbols and safety instructions
Installation, commissioning and servicing
Installation, commissioning and servicing must only be carried out by a
competent registered engineer.
▶ Only use original spares.
▶ Advise the user to have the system regularly serviced by a
competent, qualified engineer (such as OFTEC registered personnel)
using approved spares, to help maintain the economy, safety and
reliability of the appliance.
Fitting and Modification
Fitting the appliance and any controls to the appliance may only be
carried out by a competent engineer in accordance with these
instructions and the relevant Installation Regulations.
Flue systems must not be modified in any way other than as described in
the fitting instructions.
Any misuse or unauthorised modifications to the appliance, flue or
associated components and systems could invalidate the warranty. The
manufacturer accepts no liability arising from any such actions,
excluding statutory rights.
Electrical work
Electrical work must only be carried out by a qualified electrician.
▶ Before starting electrical work:
– Isolate the mains electrical supply and secure against
unintentional re-connection.
– Check for zero potential.
▶ Also follow connection diagrams of other system components.
Handover to the user
When handing over, instruct the user in how to operate the heating
system and inform them about its operating conditions.
▶ Explain how to operate the heating system and draw the user's
attention to any safety-relevant action.
▶ Explain that modifications and repairs must only be carried out by an
authorised contractor.
▶ Advise the user to have the system serviced annually by a competent,
OFTEC registered engineer.
▶ Leave the installation instructions with the completed
commissioning form and the operating instructions with the user or
at the gas meter.
4 Greenstar Utility ErP - 6 720 821 751 (2018/04)