Ordering Accessories - Philips PQ208 Manual

6 Clean the hair chamber with the
cleaning brush (Fig. 12).
7 Put the shaving unit back onto
the shaver (Fig. 13).
Every two months: shaving
heads
Preparation
1 Switch off the appliance.
2 Press the release button (Fig.
10).
3 To remove the shaving unit, pull
it straight off the appliance.
Remove the shaving heads
1 Push the sides of the central
spring towards each other and
lift the retaining frame out of the
shaving unit (Fig. 14).
2 Slide the shaving heads out of
the retaining frame (Fig. 15).
Remove and clean one shaving
head at a time. Each shaving
head consists of a cutter and a
guard.
Note: Do not clean more than
one cutter and shaving guard at
a time, they are all matching
sets. If you accidentally put a
cutter in the wrong shaving
guard, it may take several weeks
before optimal shaving
performance is restored.
3 Remove the guard from the
cutter (Fig. 16).
Clean the cutter and the guard
1 Clean the cutter with the
cleaning brush. Brush carefully in
the direction of the arrows (Fig.
17).
2 Clean the guard with the
cleaning brush (Fig. 18).
Install the shaving heads
1 Put the cutter back into the
guard (Fig. 19).
2 Slide the shaving heads back
into the retaining frame (Fig. 20).
3 Put the retaining frame back into
the shaving unit ('click') (Fig. 21).
4 Put the shaving unit back onto
the shaver (Fig. 13).
Storage
Keep the appliance dry.
Use and store the appliance at a
temperature between 5°C and 35°C.
1 Switch off the appliance.
2 Put the protection cap on the
shaving unit after use to prevent
damage and to avoid dirt
accumulation in the shaving
heads (Fig. 22).
3 PQ208: Store the shaver in the
pouch supplied.
Replacement
For maximum shaving performance,
we advise you to replace the
shaving heads every two years (Fig.
23). Replace damaged shaving
heads immediately. Always replace
the shaving heads with original
Philips shaving heads ( 'Ordering
accessories').
For instructions on how to remove
the shaving heads, see chapter
'Cleaning and maintenance', section
'Every two months: shaving heads'.

Ordering accessories

To buy accessories or spare parts,
visit www.philips.com/parts-and-
accessories or go to your Philips
dealer. You can also contact the
Philips Consumer Care Center in
your country (see the international
warranty leaflet for contact details).
Available parts
The following accessories and
spare parts are available:
- HQ4+ Philips shaving heads for
China
- HQ56 Philips shaving heads for
the rest of the world
- HQ110 Philips Cleaning Spray
Note: The availability of the
accessories may differ by country.
Recycling
- Do not throw away the product
with the normal household
waste at the end of its life, but
hand it in at an official collection
point for recycling. By doing this,
you help to preserve the
environment.
- This product contains
disposable batteries which shall
not be disposed of with normal
household waste.
- Follow your country's rules for
the separate collection of
electrical and electronic
products and batteries. Correct
disposal helps prevent negative
consequences for the
environment and human health.