C Preparation For Use; Antenna/Cable Connection - Sylvania 6727FDE Owner's Manual

46.
ANT. in Jack
Connect to an antenna, cable system, or satellite
system.
47.
Power cord
Connect to a standard AC outlet (120V/60Hz).
Remove the power cord from the hook to
NOTE:
avoid breaking a wire before you connect
to a standard AC outlet.
Satellite Box or
Cable Box (Not supplied)
O UT
75-ohm
From Cable Coaxial
System Cable
(Not sup-
plied)
75-ohm Coaxial
Cable (Not
supplied)
VHF/UHF SEPARATE ANTENNAS
In some areas it will be necessary to use an outdoor
antenna.
CABLE WITHOUT CONVERTER/
DESCRAMBLER BOX
Use this connection if your cable system connects
directly to your TV/VCR/DVD without a converter
box.
By using this connection you can:
1) Use the TV/VCR/DVD remote to select channels.
2) Program one or more unscrambled channels for
Automatic Timer Recording.
NOTE: This TV/VCR/DVD will ONLY record and
view the same channel.
PREPARATION FOR USE

ANTENNA/CABLE CONNECTION

From Cable System or
IN
Satellite Dish
ANT.
or
48.
COAXIAL digital audio out Jack
Connect to the digital input of an external
amplifier or decoder for DVD audio only.
or
VHF/UHF
Combiner
(Not supplied)
or
CABLE WITH CONVERTER/
DESCRAMBLER BOX OR SATELLITE
BOX
If your cable service supplies you with a converter
box or if you use a satellite system, you can use the
basic connection shown in the illustration.
By using this connection you can also record scram-
bled channels. However, channel selection must be
made with the converter box or satellite box. This
means that channels cannot be changed using the
TV/VCR/DVD Remote Control. Unattended timer
recording is limited to one channel at a time.
- 11 -
VHF/UHF Antenna
(Not supplied)
VHF Antenna (Not supplied)
UHF Antenna
(Not supplied)
[Fig. 4]
Flat twin-lead cable
Antenna/Cable Connections
Continued on the Next Page.
EN
1C29