Advertisement
English
Assembly
Warning! Make sure that the appliance is
switched off and unplugged.
Fitting and removing the attachments
(Fig. A)
• Allow the appliance to cool before
changing the attachments.
• Fit the concentrator nozzle (4) by
pushing it onto the outlet sleeve until it
snaps into place. Removed the item by
pulling it from the appliance.
Use
Warning! The appliance may be hot during
use and during the cool-down period.
Selecting the correct voltage setting
(Fig. B)
• Before plugging the unit into a power
supply socket, ensure the voltage
selector (2) is set to the correct voltage
for the location - either 120V or 230V.
Switching on and off (Fig. C)
• The speed control switch has three
positions: off, slow and fast.
• Move the switch to position 0 to switch
the appliance off.
• Turn the switch to position 1 for blowing
air at a slow speed.
• Turn the switch to position 2 for blowing
air at a high speed.
Cleaning and maintenance
Warning! Switch the appliance off and
unplug it before cleaning or maintenance.
• Do not try to disassemble or repair the
hair dryer yourself.
• Switch off the appliance before cleaning,
changing accessories or touching any
parts which move in use.
• Always clean the appliance immediately
after use.
• Clean the appliance with a damp cloth.
Warning! Do not immerse the appliance, the
cord set or the plug in water or any other
liquid.
Warning! Do not wash any parts in a
dishwasher.
Technical Data
Voltage
Power Input
Weight
-5-
PX1200
V
110-120/220-240
W
1000-1200
g
300
Advertisement
