Daylight-Saving Time - Sylvania 27 inch 6727DE Owner's Manual

NOTE: During Auto Clock CH Search, the picture
may be distorted, this is normal.
4
Enter the channel number that contains the
Automatic Clock Setting Signal
Press the SETUP button on the remote control.
Press the Arrow button K or L to
select "SETTING CLOCK".
Press the ENTER button to enter
"SETTING CLOCK" menu.
Press the Arrow button K or L to
select "AUTO CLOCK CH".
Press the ENTER button or the
Arrow button { or B until you
locate Auto Clock Set station num-
ber. See step [3] on page 16.
Press the SETUP button to exit the
screen.
5
Turn off the TV/VCR/DVD
Once the TV/VCR/DVD is turned off , it will period-
ically check and set the correct date and time.
Select this feature and the TV/VCR/DVD's clock
automatically will advance one hour in April, then
reverse one hour in October.
When Daylight-Saving Time is ON, the clock will
– M E N U –
change automatically as follows:
TIMER PROGRAMMING
PICTURE CONTROL
•
B SETTING CLOCK
First Sunday of April :
CHANNEL SET UP
USER'S SET UP
diately changes to 3 AM. Any timer programming
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
you have set to occur between 2 AM and 3 AM
ZERO RETURN
TIME SEARCH
will not record.
•
– SETTING CLOCK –
Last Sunday of October :
AUTO CLOCK [ON] immediately changes to 1 AM.
AUTO CLOCK CH SEARCH
B AUTO CLOCK CH [ 45]
MANUAL CLOCK SET Make sure ...
D.S.T. [OFF]
•
Press the POWER button to turn on the TV/VCR/DVD.
1
Press the SETUP button on the
remote control.
Press the Arrow button K or L to
point to "SETTING CLOCK".
Then press the ENTER button.
2
Press the Arrow button K or L to
point to "D.S.T.".
Then press the ENTER button until
[ON] appears.
3
Press the SETUP button on the remote control to
return to TV mode.
TO CANCEL THE DAYLIGHT-SAVING
TIME
Repeat steps [1] to [2], select [OFF] using the
ENTER button.
- 17 -

DAYLIGHT-SAVING TIME

At 2 AM the clock imme-
Select "SETTING CLOCK"
Set "D.S.T." (Daylight-Saving Time) to [ON]
Exit the Daylight-Saving Time mode
TV/VCR
At 2 AM the clock
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
B SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
– SETTING CLOCK –
AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
MANUAL CLOCK SET
B D.S.T. [ON]
EN
1C29