Sylvania LD427SSX Owner's Manual page 46

O
PERATING BLU-RAY
Camera Angles Camera Angles
BD DVD
Some BD/DVD may contain scenes which have been shot simultaneously
from various angles. You can change the camera angle if "
the screen.
1
During playback, press [ANGLE] repeatedly
until " " appears.
• angles can be varied on the displayed number.
2
Use [Cursor K / L] repeatedly until your desired
camera angle appears.
or
3
Press [BACK] or [ANGLE] to exit.
or
Note:
• If "Angle Icon" is set to "Off" in "Others" menu, "
appear. (Refer to page 51.)
PIP (Bounusview) Setting PIP (Bounusview) Setting
BD
Some BD-video have the PIP function which enables you to display the
secondary video in the primary video. You can call up the secondary video
by pressing [PIP] whenever the scene contains the secondary video.
1
During playback, press [PIP].
• primary video
• secondary video
• PIP information will appear.
2
Use [Cursor K / L] to select the secondary video you
want.
• The secondary video will be displayed and the
secondary audio will be output.
3
Press [BACK] or [PIP] to remove the PIP information.
or
Note:
• Secondary video can also be called up by pressing [MODE].
• The secondary audio will not be output when the secondary
audio is set to "Off" or when "BD Audio Mode" is set to "HD
Audio Output". Refer to "Audio Soundtrack" on page 45 and
"BD Audio Mode" on page 44.
46
EN
" appears on
1 / 3
2 / 3
" will not
Virtual Surround Virtual Surround
You can enjoy virtual surround on your 2 channel stereo system.
1
During playback, press [MODE] repeatedly until "
appears.
2
Use [Cursor K / L] to select the sound level.
or
Off No surround effect
1 Natural surround effect
2 Stronger surround effect
3
Press [BACK] to exit.
Note:
• Virtual surround does not function during rapid playback.
• For the virtual surround, audio signal will always be
2-channel LPCM.
• Turn down the level or select "Off" if the sound is distorted.
Noise Reduction Noise Reduction
DVD
Reduces the noise of the playback picture.
1
During playback, press [MODE] repeatedly until "
appears.
2
Use [Cursor s / B] to select the sound level.
or
Off Shows the original picture as recorded.
Executes 3D noise reduction which detects and
1 deletes the noise by comparing each picture
frames.
Executes MPEG noise reduction which reduces
2 the block noise and mosquito noise on the
subtitle on movie.
Executes both MPEG noise reduction and 3D
3
noise reduction.
3
Press [BACK] to exit.
Note:
• The setting will remain the same even if the unit is turned to
the standby mode.
• You cannot adjust the setting during rapid playback.
Off
1
Noise Reduction Off
Noise Reduction 1
"
"