External Device Connection - Sylvania LC320SS9 A Owner's Manual

Cables not included.
Please purchase the necessary cables at your local store.

External Device Connection

[HDMI Connection]
HDMI (High-Definition Multimedia Interface) transports high definition video and multi-channel digital audio through
a single cable. It ensures that the content sent from the source to the unit is of the highest possible resolution.
Use an HDMI cable to connect the unit to external video devices equipped with HDMI output jack.
e.g.)
TITLE 5
CHAPTER 15
REPEAT A-B
DVD player with the HDMI output jack
Note:
• This unit accepts 480i / 480p / 720p / 1080i video signals, and 32kHz / 44.1kHz / 48kHz audio signals.
• This unit accepts only 2 channel audio signal (LPCM).
• You need to select "PCM" for the digital audio output of the device connected or the check HDMI audio setting.
There may be no audio output if you select "Bitstream", etc.
• This unit only accepts signals compliant with EIA861.
[HDMI-DVI Connection]
Use an HDMI-DVI conversion cable to connect the unit to external video devices equipped with DVI output jack.
e.g.)
STEREO
PCM
cable box or satellite box
with the DVI output jack
Note:
• This unit accepts 480i / 480p / 720p / 1080i video signals.
• HDMI-DVI connection requires separate RCA audio connection as well.
• Audio signals are converted from digital to analog for this connection.
• DVI does not display 480i image that is not compliant with EIA/CEA-861/861B.
HDMI cable
HDMI OUT
HDMI-DVI
conversion cable
DVI OUT
AUDIO OUT
L R
RCA audio cable
To HDMI1 input jack only
HDMI-IN
L
AUDIO
R
rear of this unit
rear of this unit
9
EN