Manual Register; Antenna Confirmation - Sylvania lc320ss8 Owner's Manual

Manual Register

The manual register function lets you add the channels that were not added
by the auto channel scan due to the reception condition at the initial setting.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select "CHANNEL", then press
[ENTER].
3
Use [Cursor K / L] to select "Manual Register", then
press [ENTER].
4
Use [the Number buttons] to enter the number of the
channel you want to add, then press [ENTER].
5
Press [SETUP] to exit.
Note:
• If set up completes successfully, "Registered to the Channel
List" is displayed.
• If external input is used, it is not possible to register the
channel and "Unavailable" will be displayed on the TV
screen.
This function lets you check the signal strength of each channel.
1
2
3
Channel
Channel
Autoscan
Channel List
Manual Register
Antenna
4
11
Manual Register
Manual Register
Register
For analog channels,
select a channel to register
using number keys.
For digital channels,
you must perform Autoscan function.
BACK
Ch Change Back
5

Antenna Confirmation

Press [SETUP] to display the main menu.
Use [Cursor K / L] to select "CHANNEL", then press
[ENTER].
Use [Cursor K / L] to select "Antenna", then press
[ENTER].
Use [the Number buttons] or [CH K / L] to select the
channel for which you want to check the signal strength.
• If the channel is set to external input, you cannot
confirm the antenna condition.
Press [SETUP] to exit.
Channel
Channel
Autoscan
Channel List
Manual Register
Antenna
11
Antenna Antenna
Back
Now 0 Peak 0
Ch Change
CH
Video1
Antenna Antenna
Back
Indicator is available
for antenna signal only.
Ch Change
CH
23
EN