Advertisement
Quick Links
Advertisement
Summary of Contents for Salton GP-1096
- Page 1 ® garment press Instruction Booklet Model: GP-1096...
-
Page 2: Important Safeguards
Return appliance to Salton for examination, repair or adjustment. See Warranty. 9. The use of accessories or attachments not recommended by Salton may cause hazards. 10. Always turn the Timer Dial to the ‘0’ position before plugging or unplugging the unit from the wall outlet. - Page 3 15. Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to ‘OFF’, then remove plug from wall outlet. To unplug grasp plug and pull smoothly and firmly from the wall outlet. DO NOT attempt to unplug unit by pulling or tugging on the cord. 16.
-
Page 4: Before First Use & Assembly
BEFORE FIRST USE & ASSEMBLY 1. Ensure that you have the following: 4 long screws 2 short screws 6 washers 1 Allen wrench 2. To assemble the unit, lay the unit on its side or flat on top of a table. 3. -
Page 5: Helpful Hints
4. While the Front Pressing Plate is in this position, hold the waistline of the pants/skirt and gently pull upwards. This will smooth out any wrinkles and ensure that the pants/skirt are lying flat between the Front Pressing Plate and the Heating Plate. 5. -
Page 6: Care And Cleaning
5. DO NOT dampen clothing before pressing. 6. Press one pair of pants/skirt at a time and ensure that all pockets are empty. CARE AND CLEANING 1. Set the Timer Dial to the ‘0’ position and unplug the power cord from the wall outlet. -
Page 7: Limited Warranty
For repairs not covered by the warranty, please contact us for assistance. SALTON CANADA Customer Service Department 81A Brunswick, Dollard-des-Ormeaux, Quebec, Canada H9B 2J5 website: www.salton.com E-mail: service@salton.com Fax: 514-685-8300 Tel: 514-685-3660 * Return/exchange policies at each retailer vary and may differ from the SALTON Canada 1 year limited warranty period.