Picture Adjustment - Sylvania LC225SC9 Owner's Manual

O
PTIONAL SETTING

Picture Adjustment

You can adjust brightness, contrast, color, tint and sharpness.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select "PICTURE", then press
[ENTER].
or
3
Use [Cursor K / L] to select the item you want to adjust,
then press [ENTER].
or
4
Adjust the picture quality.
Picture Mode
Use [Cursor K / L] to select the desired setting, then
press [ENTER]. (Standard, Dynamic, Movie and News)
or
Brightness, Contrast, Color, Tint, Sharpness
Use [Cursor s / B] to adjust.
or
22
EN
Picture Picture
Dynamic
Picture Mode
30
Brightness
Contrast 60
Color 36
Tint
0
Sharpness 0
Reset Settings
Color Temp. Neutral
Back Light 0
Picture
Picture
Picture Mode Standard
Brightness Dynamic
Contrast Movie
Color News
Tint
Sharpness
Reset Settings
Color Temp.
Back Light
5
Brightness
Brightness 30
Adjust Move Enter
ENTER
Contrast
Contrast 30
Adjust Move Enter
ENTER
Color
Color 30
Adjust Move Enter
ENTER
Tint
Tint 0
Adjust Move Enter
ENTER
Sharpness
Sharpness 0
Adjust Move ENTER Enter
Reset Settings
Use [Cursor K / L] to select "Reset", then press [ENTER]
to restore the "Picture Mode" settings to the default.
or
Color Temp.
Use [Cursor K / L] to select the desired setting, then
press [ENTER]. (Cool, Neutral and Warm)
or
Back Light
Use [Cursor s / B] to adjust the brightness of the backlight.
: To brighten
: To darken
Press [SETUP] to exit.
Note:
• To cancel picture adjustment, press [SETUP].
• When this unit is connected to PC or DVI devices,
you cannot select "Sharpness".
Cursor s Cursor B
to decrease to increase
brightness brightness
to decrease to increase
contrast contrast
to decrease to brighten
color color
to add red to add green
to make soft to make clear
Reset Settings Reset Settings
Cancel
This function resets the Reset
"Dynamic" setting for Picture
Mode to factory default.
Picture Picture
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Reset Settings
Cool
Color Temp. Neutral
Warm
Back Light
Back Light 0
Adjust Enter
ENTER