Fast Forward/Reverse; Slow Motion; Starting From A Desired Track; Starting From A Desired Time Count - Sylvania DVL500A Owner's Manual

FAST FORWARD/REVERSE

1 Press the FWD D or REV E button during
playback. (The sound for DVD is muted.)
For DVDs, pressing the FWD D or REV E button
cycles the playback speed in three steps.
For audio CDs, the playback speed is fixed.
E
REV Button
E x2
E x8
E x32
2
Press the PLAY button to return to normal play-
back speed.

SLOW MOTION

1 Press the FWD D button while playback is
paused. (Sound remains muted.)
Slow motion mode will be activated.
Pressing the FWD D button cycles the playback
speed in three steps. Select an appropriate speed
while referring to the speed indication on the screen.
2
Press the PLAY button to return to normal play-
back speed.
Notes
Slow playback is not available with audio CDs.
The reverse of slow playback is not available.
STARTING FROM A DESIRED
TRACK
DVD CD
D
FWD Button
D x2
D x8
D x32
DVD
D Button
FWD
1/16
1/8
1/2
CD
1
Press the numeric buttons to enter the desired
track number.
The selected track will be located, and playback will
start.
You can also press the SEARCH MODE button, use the
numeric or / buttons to enter the track number, and
then press the PLAY button.
Pressing the SEARCH MODE button
during playback causes the current
track number to be displayed in
square brackets.
TRICKS WITH THE SKIP BUTTONS ( H, G)
If the SKIP button G is pressed during playback or
while playback is paused, the current track is skipped and
the next track is played. When the SKIP button H is
pressed once, the top of the current track is located for
replaying. When the SKIP button H is pressed again
while playback is paused, the previous track is located.
Each time the SKIP button H is pressed while playback
is paused, the disc is searched backward track by track.
Once playback has started, pressing the SKIP button H
locates the top of the current track.
STARTING FROM A DESIRED
TIME COUNT
1
Press the SEARCH MODE button.
Press the button three times for
DVDs or two times for audio CDs.
2
Press the numeric buttons to set the desired
time count.
Example: 1 hour, 23 minutes and
30 seconds
1 +10 +10 3
+10 +10 +10 0
To enter 0 (zero), press the nu-
meric 0 (zero) button or press the B button.
3
Press the PLAY button. Playback will then start
from the set time count.
Notes
Playback from a desired time count is not available
with some discs.
Specific time playback is not available with some
discs or if the unit is in stop mode.
- 15 -
SEARCH/TRACK
TOTAL TRACKS: 07
TRACK [ 6 ]
_
Start Exit
DVD CD
SEARCH/TIME
TOTAL TIME 1h23m45s
TIME [ _h__m__s ]
Start Exit
SEARCH/TIME
TOTAL TIME: 1h23m45s
TIME [1h23m30s] _
Start Exit
EN
0D05