Festool CTM 48 E LE EC Original Operating Manual page 19

► Replace the top section [2-1] and close the
locking clips [2-2].
9.2 Changing the cooling air filter [8]
Replace the cooling air filter if the mobile dust
extractor switches off due to excess tempera­
ture and replace at least once a year.
We recommend that you always re­
place the cooling air filter together
with the main filter.
► Unscrew the cooling air cover [8-1].
► Remove the cooling air filter and replace
with a new one!
► Close the cooling air cover.
9.3 Emptying the dust container
The dust container [2-3] can be emptied once
the top section has been removed.
► After extracting fluids, clean the fill level
sensors [9-1] regularly with a soft cloth and
inspect for damage.
10 Accessories
Use only original Festool accessories and Fes­
tool consumable material intended for this ma­
chine. These components are designed specifi­
cally for this machine. Using accessories and
consumable material from other suppliers will
most likely affect the quality of your results and
limit warranty claims. Machine wear or your
own personal workload may increase depend­
ing on the application. Protect yourself and your
machine, and preserve your warranty claims by
always using original Festool accessories and
Festool consumable material!
The order numbers for the accessories and fil­
ters can be found in the Festool catalogue or on
the Internet at "www.festool.com".
11 Environment
Do not dispose of the device in house-hold
waste! Recycle devices, accesso-ries and
packaging. Observe
regulations.
EU only: In accordance with European Directive
on waste electrical and electronic equip-ment
and implementation in national law, used
electric power tools
separately and handed in for environmentally
friendly recy-cling.
applica-ble national
must be collected
Information on REACh: www.festool.com/reach
English
19