Switching Each Input Mode; Tv Screen Display Mode; Channel Selection - Sylvania A0171 Owner's Manual

Switching Each Input Mode

Switching Each Input Mode
external devices when they are connected to the unit.
Press SOURCE or CH + repeatedly to cycle through the input modes.
e.g.) e ) ) )
11.1 Video
11.1 Video1
DTV / TV channel
• Pressing CH − reverses the direction of the input modes.

TV Screen Display Mode

5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of display
modes can be selected for PC input signal.
Press FORMAT repeatedly to switch the TV aspect ratio.
For 16:9 video signal
Normal
Wide
For 4:3 video signal
Normal
Wide
For PC input signal
Normal

Channel Selection

Select channels by using CH +/− or the Number buttons.
To select the memorized channels, use CH +/− or the Number buttons.
•
• To select the non-memorized channels, use the Number buttons.
To use the Number buttons
ATSC
- When selecting digital channel 11.1
Be sure to press • before entering the subchannel number.
PREV CH to return to the previously channel.
[No Signal] will appear on the TV screen after the subchannel broadcast is over.
Note •
[Audio only program] message will appear on the TV screen, when you receive only sound signal.
•
can easily switch with the remote control between TV (ATSC or NTSC) and
Component HDMI1
Video2 Component
4:3 Movie Expand
Zoom
16:9 Movie Expand
Zoom
Full Dot By Dot
HDMI2
HDMI1 HDMI2
Normal
displays a 16:9 picture at its original size.
4:3
displays a 16:9 picture at a 4:3 size; the picture
is shortened horizontally. Sidebars appear on both
edges of the screen.
Movie Expand
displays a 16:9 picture that is
vertically stretched to fi ll the screen. This only crops
out the top of the picture.
Zoom
displays a 16:9 picture at its maximum size
without changing its horizontal and vertical ratio.
Wide
displays a horizontally stretched picture. This
crops out the left and right sides of the picture.
Normal
displays a 4:3 picture at its original size.
Sidebars appear on both edges of the screen.
16:9
displays a 4:3 picture at a 16:9 size; the picture is
stretched horizontally to fi ll the screen.
Movie Expand
displays a 4:3 picture at a 16:9 size;
the picture is stretched more vertically at the top of
the screen. This crops out the top of the picture.
Zoom
displays a 4:3 picture at a 16:9 size; at its
maximum size that is more vertically stretched to fi ll
the screen. This crops out the top and bottom of the
picture.
Wide
displays the picture with its center at the
original size and the edges stretched horizontally to fi ll
the screen.
Normal
displays a proportionately stretched picture.
Sidebars appear on both edges of the screen.
Full
displays a picture that is stretched out of
proportion to fi ll the screen.
Dot By Dot
displays a picture in its original size.
NTSC
-
When selecting analog channel 11
English
Source
TV
Video
PC
HDMI3
Component
HDMI1
HDMI2
PC
11.1
17
EN