Troubleshooting - Esoteric OP-DAC1 Owner's Manual

Troubleshooting

If you experience a problem with the unit, please take a
moment to review the following information before requesting
service. Moreover, the problem might be caused by something
other than this unit. Please also check the operation of the con-
nected units.
If this product still does not operate correctly, contact the retailer
where you purchased it.
No sound is output from the speakers. The sound is
distorted.
e In this case, turn the power off and check the connec-
tions with the digital audio source device, the amp and
the speakers (page 8).
No sampling frequency is shown on the display.
e Turn the device that is connected to the selected input
connector on.
e Confirm that the device is properly connected to the
selected input connector.
This unit uses a microprocessor, so noise and other
external interference could cause it to stop functioning
properly. If this occurs, turn the unit off once, and then
restart it after waiting for about one minute.
15