Section 5 − Replacing The Lens Covers; Replacing Outside Lens Cover - Hobart Endeavor Series Owner's Manual

SECTION 5 − REPLACING THE LENS COVERS

5-1. Replacing Outside Lens Cover

2
2
1
Be sure flat side of gasket
faces lens cover holder.
3
!
Never use the auto-darkening
lens without the inside and
outside lens covers properly
installed. Welding spatter will
damage the auto-darkening
lens and void the warranty.
1 Front Lens Holder
2 Release Points
3 Lens Cover
4 Gasket
Remove front lens holder by press-
ing release points and pulling the
holder away from the helmet.
Remove lens cover and gasket from
the holder. Replace lens cover and
reinstall gasket and lens in holder.
Reinstall holder in helmet.
.
Be sure the flat side of lens cov-
er gasket faces the lens cover
holder.
4
OM-272 158 Page 9