Reloading The Fuel - Royal SELENE General Information - Warnings - Installation - Maintenance

6.7

RELOADING THE FUEL

To load fuel inside the machine while it is running, follow
the procedure below:
•
smoke to escape in the environment (based on the
draught of the fume exhaust duct).
•
Avoid overheating the stove by loading an excessive
amount of fuel.
Insert the fuel only when the grill bases are formed
6.8 ADJUSTING THE PRIMARY AIR
regulated by the register located on the front of the ash
box door (-6.4-).
If you want to get a quicker combustion, pull the air
register outwards to open the valve.
If you want to achieve a slower combustion, push the air
is damp, it is advisable to keep the register fully open.
register depending on how much heat is required or how
has been lighted up, the stove can work at the nominal
charge and the combustion air register can be turned off..
The draught should be adjusted by the installer at stove
commissioning.
If the fume exhaust duct draught is optimal, leave the
valve open, if the draught is excessive close it making
sure that there are no smoke puffs in the environment if
the door is opened.
The declared nominal yield of the chimney is obtained
by burning the right quantity of wood, making sure not
to overload the combustion chamber. The ideal length of
the wood is provided by the length of the log holder.
28
fig. 6.4
00 477 6240 - 09/2017 - PN - Italy
-
+