Boot Features - ECS 965PLT-A Manual

38
After Power Failure (Stay Off)
This item enables your computer to automatically restart or return to its last operating
status after power returns from a power failure.
Soft-Off by PWR-BTTN (Instant-Off)
Under ACPI (Advanced Configuration and Power management Interface) you can create a
software power down. In a software power down, the system can be resumed by Wake Up
Alarms. This item lets you install a software power down that is controlled by the power
button on your system. If the item is set to Instant-Off, then the power button causes a
software power down. If the item is set to Delay 4 Sec. then you have to hold the power
button down for four seconds to cause a software power down.
Wake on PME (Disabled)
This item specifies whether the system will be awakened from power saving modes when
activity or input signal of the specified hardware peripheral or component is detected.
Wake on Modem Ring (Disabled)
An input signal on the serial Ring indicator (RI) line (in other words, and incoming call on
the modem) awakens the system from a soft off state.

Boot Features

This option defines boot information about your system.
Main
Onboard LAN Boot ROM
Onboard LAN Boot ROM (Disabled)
Use this item to enable or disable the boot function using the onboard LAN boot rom.
InsydeH20 Setup Utility
Advanced Security Power Boot
<Disabled>
Using BIOS
Exit
Select Boot Device
+ -
Select Screen
< >
Select Item
Select SubMenu
Enter
F9 = Setup Defaults
F10 = Save and Exit
ESC = Exit