Epson ELPMB62 Installation Manual page 10

Hardware
Shape
M4 × 12 mm hexagon socket head cap bolt with
washer/spring washer
M6 × 20 mm hexagon shoulder head bolt with
washer/spring washer
M6 × 20 mm cross recessed head shoulder screw
with plastic washer
M3 × 6 mm cross recessed head shoulder screws
•
Use the bolts or screws supplied with the wall mount to install it as directed in this guide. Do not
substitute these bolts with any other types.
•
You need to use commercially available M10 × 60 mm or 3/8 inch anchors (at least 4) and one M10 screw
to attach the wall plate to the wall.
•
Gather the tools and parts you need before you begin installation, including a #3 cross-head screwdriver.
Accessories
Template sheet
(for installing the wall plate)
Mini PC band
Masking sticker
*Included with the projector.
Name
Corner markers*
Mini PC plate
Open-ended wrench
13 mm (for M8 and M6) × 6 mm
(for hexagonal shaft)
10
Quantity Application
5 For wall plate assembly
4 For 3-axis adjustment unit/wall mount
installation
4 For slide plate/projector installation
1 For wall mount/wall plate installation
3
4
For Mini PC plate installation
Safety wire installation kit (for
securing the projector)
Magnets for corner markers*
Hexagon wrench (for M4)