Sony MFS-2000-C Installation Manual page 46

3. Install the rack angle assembly (L) and the rack angle
assembly (R) on the control panel using the supplied
six screws (B4 x 14).
Rack angle assembly (L)
B4 x 14
4. Install the blank panel on the rack angle assemblies
with the supplied four screws (B3 x 6).
B3 x 6
Rack angle
assembly (L)
3-12
Control panel
B4 x 14
Rack angle assembly (R)
Blank panel
B3 x 6
Rack angle
assembly (R)
5. Install the control panel on the control console with the
supplied six screws (B5 x 8).
B5 x 8
Control console
6. Install the rack angle cover (L) and the rack angle
cover (R) removed in step 2 on the rack angle assem-
bly (L) and the rack angle assembly (R) respectively.
n
Fit the covers on the rear side first and push them on
the front side lightly to install.
7. Tighten the rack angle cover (L) and the rack angle
cover (R) using the screws removed in step 2.
Front side
B3 x 4
Rack angle
cover (L)
Control panel
B5 x 8
Rack angle cover
Rear side
B3 x 4
Rack angle
cover (R)
MFS-2000 IM