Table of Contents
Advertisement
Break In Period
fewer repairs over its lifetime.
off to a great start.
1. Avoid running engine at high speeds.
2. Do not carry a heavy load (passengers, gear, etc.).
same RPM for a long period of time.
BREAK-IN STEPS
- For the second hour, do not exceed 3,000 RPM.
BREAK-IN TIPS
- Avoid fast accelerations and don't carry (or pull) a heavy
load during this period.
engine can use more oil than usual. Maintain oil at a
and clamps.
anything unusual to your dealer.
ated continuously at any speed.
Do not exceed maximum RPM recommended for your
engine. Exceeding the maximum RPM may result in
damage to the engine.
Before starting your engine you must open the engine
box and check engine compartment and bilge for gasoline
and oil vapors.
© 2007 Skier's Choice, Inc.
© 2007 Skier's Choice, Inc.
Starting & Operation
1. Check the engine oil level.
engine to remove any fumes.
areas are empty.
-
REFER TO THE BOATMAN'S CHECKLIST OF THIS
MANUAL.
NOTE: Add-on electrical accessories should never be
connected to the ignition terminal or ignition circuit.
-
more than 15 seconds at a time without pausing to allow the
starter motor to cool down for at least 2 minutes. This will
The correct starting procedure depends upon the type of en-
Section VI
Operating Information
25 —
-
Hide quick links:
Advertisement
Table of Contents
