Page 1
Technical Bulletin 142 - Control-R™ Recirculation Accessory Pairing The purpose of this technical bulleting is to communicate an update to the pairing instructions for all Control-R™ recirculation accessories. Updates include the following: • Ensuring the module LED has been red for at least one minute prior to beginning the pairing process. •...
Page 2
Operate the Push Button IMPORTANT: • Press the Push Button to activate the Rinnai Tankless Water Heater Make sure the module LED has been RED for recirculation system. The recirculation system will deactivate after at least 1 minute prior to beginning push five minutes from initiation or when the water has reached the set button pairing process .