Answering A Call; Ending A Call - Motorola AX Series User Manual

u d
4. Scroll or
t
5. Press to dial.
Note
The caller ID received on your Motorola AX base may only display 7 digits for calls
made from within your local area. However, in some area you might have to dial the
full 10-digit number for the call to connect.
To change the number format suitable for local and long distance dialing, you can
press # repeatedly while viewing individual call details to add or remove 1 and
the stored area code. For example, if a caller number is displayed as 123-4567, the
various formats will be:
123-4567
555-123-4567
1-555-123-4567
where 555 is the stored area code. To update area code setting, see page 43.
If you receive a call from outside your area code, you will see all 10 digits and
the stored area code will not be used. You can still use # to change the number
format to add or remove 1 and area code as shown.
5.3.6.2 Predial a number in the calls list
1. Press to enter the call list menu.
u
d
2. Press , scroll
Outgoing Calls,
3. Press Select, the most recent number (or name if stored in the contacts list) is
displayed.
u d
4. Scroll or
d
Predial
5. Scroll to
t
6. Press to dial.
5.4

Answering a call

When you receive a call, the phone rings and the phone number (or name if stored
in the contacts list) is displayed.
t
1. Press to answer the call.
Note
If you prefer for the call to be automatically answered when you lift the handset off
the charger, you will need to switch Auto answer on, see page 35.
5.5

Ending a call

O
Press , or place the handset back on the charger.
Note
You can end calls simply by placing the handset on the charger. To turn this feature
off, see Auto hang-up, on page 35.
24
to the entry you want to dial.
u d
or to highlight the calls list
Accepted Calls, All
to the entry you want and press Options.
and press Select. The number is displayed.
(Missed
Calls) you want.
Calls, Incoming Calls,
Using the phone