1. Manuals
  2. Brands
  3. Vector Manuals
  4. Water Pump
  5. 2003
  6. Installation and operation manual

Vector 2003 Installation And Operation Manual

Peristaltic pamps.
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Pe ri s t a l t i c Pu m p s
Vector 2000 Series
Models: 2002, 2003, 2004, 2005, 2006, 2007
Models: 2002, 2003, 2004
WANNER ENGINEERING, INC.
1204 Chestnut Avenue, Minneapolis, MN 55403
TEL: (612) 332- 5681 FA X: (612) 332- 6937
TOLL-FREE FAX [US only]: (800) 332-6812
www.vectorpump.com
email: sales@wannereng.com
W0453
Installation and
Operation Manual
VEC-991-2400A
Models: 2005, 2006, 2007
W0454

Advertisement

Table of Contents
loading

Related Manuals for Vector 2003

Summary of Contents for Vector 2003

  • Page 1 Installation and Operation Manual VEC-991-2400A Pe ri s t a l t i c Pu m p s Vector 2000 Series Models: 2002, 2003, 2004, 2005, 2006, 2007 W0453 W0454 Models: 2002, 2003, 2004 Models: 2005, 2006, 2007 WANNER ENGINEERING, INC.

  • Page 2: Table Of Contents

    For safety and easier servicing, provide adequate work space around the pump. Allow space to remove the front Service cover, hose clamps, hose, and drive unit. Models 2002, 2003, 2004, 2005 ....... 4 W0387 Principle of Operation Models 2006, 2007 ..........6...

  • Page 3: Pump Test And Installation

    Vector Series Installation Pump Test and Installation Before Initial Start-Up Before you install the pump in the system, set the direction of Before you pump fluid through the system, be sure that: pump rotation and the position of the pressure rollers: 1.

  • Page 4: Maintenance

    B, this may occur from operating the pump under a higher vacuum or higher inlet pressure than the hose is rated for, or with a closed suction line. Service (Models 2002, 2003, 2004, 2005) Replacing Worn Hose 4. Loosen screw(s) that secure mounting bracket of pressure roller which is compressing hose.
  • Page 5 Install New Hose 1. Check for correct length of hose: Model 2002: 13 in. (330 mm) Model 2003: 15 3/8 in. (390 mm) Model 2004: 23 1/4 in. (590 mm) Model 2005: 33 7/8 in. (860 mm) 2. Install connectors in new hose.

  • Page 6: Models 2006, 2007

    Service (Models 2006, 2007) Replacing a Worn Hose Install New Hose 1. Check for correct length of hose: Remove Old Hose Model 2006: 45 1/4 in. (1150 mm) 1. Turn off and lock out all power to pump motor. Model 2007: 57 1/4 in. (1455 mm) 2.

  • Page 7: Parts List Identification Models 2002, 2003, 2004

    Parts List (Models 2002, 2003, 2004) W0467 Ref. Qty, per Ref. Qty, per Description Pump Description Pump Casing..............1 Stud ..............4 Cover, front ............1 Connector, hose ..........1 Window, cover ........... 1 Base ..............1 Bracket, mounting ..........1 Bolt, mounting ...........

  • Page 8: Models 2005, 2006, 2007

    Parts List (Models 2005, 2006, 2007) Notes: • Models 2006 and 2007 use 0.5 mm shims to adjust the hose compression. • Model 2005 uses the same style of roller assembly as Models 2002 – 2004 (see previous page. W0468 See note.

This manual is also suitable for:

20022000 series2004200520062007

Table of Contents