We recommend using wire no longer than 610 meters (2,000 feet) to connect the AVM-1 to the Bose CSP. Use shielded twisted-pair plenum wire (AWG 28 to AWG 20 [0.08 mm to 0.52 mm...
Bose CSP-428/CSP-1248 Commercial Sound Processors For complete instructions on installing a Bose CSP and accessing its CSP Configuration Utility, see the installation guide included with the Bose CSP or online at PRO.BOSE.COM. AutoVolume Controls The AutoVolume Calibration section on the Configuration >...
Min Gain and Max Gain values. The Min Gain and Max Gain settings represent the levels between which the AutoVolume algorithm will make adjustments. Application Guide • Bose CSP & AVM-1 AutoVolume English • 5...
Page 6
Note: After successful calibration, you must set the toggle to AV: ON to enable AutoVolume compensation. After AutoVolume calibration is complete, the AutoVolume function maintains the Relative Gain that you configured for the listening area. 6 • English Bose CSP & AVM-1 AutoVolume • Application Guide...
You can compensate for this by lowering the Relative Gain setting to a negative value. High-ceiling installation Low-ceiling installation 8 • English Bose CSP & AVM-1 AutoVolume • Application Guide...