Page 1
James Martin Food Processor Please read all instructions carefully to familiarise yourself with the Wahl James Martin Food Processor before using. THIS FOOD PROCESSOR IS INTENDED FOR HOUSEHOLD USE ONLY. Save these instructions for further reference. For any further assistance or information call customer services on...
DESCRIPTION OF PARTS IMPORTANT SAFEGUARDS Feeder Tube Blending Jar When using this electrical appliance, especially when children are present, basic safety Feeding Funnel Blade Base precautions should always be observed including the following. Processor Lid Chopping Jar Plastic Blade Drive shaft TO REDUCE THE RISK OF FIRE AND INJURY Whisk Motor Base...
from mains socket immediately. Do not put your hands in WARNING: ALWAYS ENSURE THE POWER CORD IS UNPLUGGED FROM THE POWER OUTLET AND THE SPEED SELECTOR IS IN THE “0” OFF the water. POSITION BEFORE ADDING OR REMOVING ANY OF THE ATTACHMENTS. 13.
CHOPPING Connect the appliance to the power supply. Firstly place the drive shaft into the motor base, make sure it is You can add ingredients through the feeding funnel while the appliance is running. in position. NOTE: the food pusher also can be used as measuring cup for measuring oil or water. Place the chopping jar on the Motor Base, lining up the arrow on the chopping jar with the unlock symbol and turn clockwise During kneading/mixing, to avoid vibration, hold the lid with one hand, and with the...
Minimum 2 minutes rest period must be maintained after one operation cycle. At WASTE ELECTRICAL & ELECTRONIC EQUIPMENT DIRECTIVE 2002/96/EC least 30 minutes rest period must be maintained to let the appliance cool down (WEEE) after three operation cycles. At the end of this products life it should not be disposed of with general Turn the speed selector to “0”position and unplug the unit after processing.
Kent may have. As part of Wahl Customer Care, we are offering you the chance to be kept CT6 8JZ up to date with the latest product launches, innovations and special offers.