Mounting On The Table - LG 55SK9500PUA Owner's Manual

• It is recommended to move the TV in the box or
packing material that the TV originally came in.
• Before moving or lifting the TV, disconnect the
power cord and all cables.
• When holding the TV, the screen should face
away from you to avoid damage.
• Hold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part,
speaker, or speaker grille area.
• Use at least two people to move a large TV.
• When transporting the TV by hand, hold the TV
as shown in the following illustration.
• When transporting the TV, do not expose the TV
to jolts or excessive vibration.
• When transporting the TV, keep the TV upright;
never turn the TV on its side or tilt towards the
left or right.
• When handling the TV, be careful not to damage
the protruding buttons.
• Avoid touching the screen at all times, as
this may result in damage to the screen.
• Do not place the product on the floor with its
front facing down without padding. Failure to do
so may result in damage to the screen.
• Do not move the TV by holding the cable
holders, as the cable holders may break, and
injuries and damage to the TV may occur,
(Depending upon model).
• When attaching the stand to the TV set, place
the screen facing down on a cushioned table or
flat surface to protect the screen from scratches.
6

Mounting on the Table

1 Lift and tilt the TV into its upright position on a
table.
• Leave a minimum of 10 cm (4 inches) space from
the wall for proper ventilation.
(Depending upon model)
2 Connect the power cord to a wall outlet.
• Do not apply foreign substances (oils,
lubricants, etc.) to the screw parts when
assembling the product.
(Doing so may damage the product.)
• If you install the TV on a stand, you need
to take actions to prevent the product
from overturning. Otherwise, the product
may fall over, which may cause injury.
• Do not use any unapproved items to
ensure the safety and product life span.
• Any damage or injuries caused by using
unapproved items are not covered by the
warranty.
• Make sure that the screws are fastened
tightly. (If they are not fastened securely
enough, the TV may tilt forward after
being installed.)
• Do not fasten the screws with excessive
force otherwise they may strip and
become loose.
Securing TV to the Wall
(Depending upon model)