Advertisement
III. BATTERY INFORMATION
Requires 4 AA alkaline batteries for the vehicle and 2 AAA
alkaline batteries for the transmitter. All batteries included.
TRANSMITTER
Transmitters are equipped with a special automatic ON
battery-saving feature. Just turn your vehicle ON. Then
push either transmitter stick and you will be able to run
and control your vehicle.
1. To install the transmitter battery, open the battery cover as
shown.
2. Install 2 AAA batteries with polarity (+/-) as shown inside the
battery compartment.
3. Replace the battery cover.
VEHICLE
1. Use a screwdriver (not included) to unscrew the power clip
cover screw, remove the battery cover.
2. Install 4 AA batteries, with polarity (+/-) as shown inside the
battery compartment.
3. Replace the battery door.
ì CONSUMER INFORMATION
Note to Adults: To ensure that the child's play is both safe
and fun, please review all operating instructions and safety rules
with your child.
SAFETY TIPS
• NEVER drive your vehicle on streets! They're for real cars!
• DO NOT pick up the vehicle while in motion.
• Keep fingers, hair and loose clothing away from the tires and
the wheel hubs while the vehicle is switched ON.
CAUTION: To prevent entanglement, keep hair away
X
from wheels.
• Adult supervision is recommended when this vehicle is
being operated.
• To avoid accidental operation, remove all batteries when
not in use. Always turn the vehicle OFF before removing
the batteries.
IV. VEHICLE OPERATION
❶ FORWARD
❷ REVERSE
❸ LEFT
❹ RIGHT
FORWARD
REVERSE
LEFT
2 x AAA
RIGHT
Advertisement
