Programming Coffee Quantity - Nespresso LATTISSIMA ONE User Manual

Preparing Cappuccino-Latte Macchiato /
EN 調製卡布奇諾/ 拿鐵瑪奇朵
TW
After a period of non use of maximum 30 minutes after your milk recipe preparation, disassemble the Rapid Cappuccino System, and clean all components
in the upper side of your dishwasher. In case a dishwasher is not available, refer to section "Hand washing of Rapid Cappuccino System".
在您的調製牛奶飲品後大約30分鐘內未使用機器時 ， 拆卸快速卡布奇諾系統 ， 並清洗洗碗機上側的所有組件 。 如果洗碗機不能使用 ，
請參閱手洗快速卡布奇諾系統部分 。
Refer to section "Assembling / Disassembling of Rapid Cappuccino System".
The Rapid Cappuccino System is not intended to be stored in the fridge.
請參閱組裝/拆除 '快速卡布奇諾系統 。

Programming coffee quantity /

預設咖啡量
Follow the step 1-2 of section "coffee preparation".
請參閱"調製咖啡"章節第1-2個步驟 。
NOTE: please refer to factory settings section for min / max programmable quantities.
注意:請參閱原廠設定章節來設定最少/最多預設量的設定 。
Touch and hold Espresso or Lungo button for
at least 3 sec to enter the programming mode.
Brewing starts and button blinks fast.
長按濃縮 、 大杯咖啡鍵至少三秒 ， 然後進
入預設模式 。 開始沖調 。 按鈕燈快速閃動 。
16
Release button when desired volume is reached. Coffee volume is now
stored for the next coffee preparations. Button blinks 3 times to confirm
the new coffee volume.
> 3 sec 按住按鈕 ， 直到達希望的水位才放開按鈕 。 現已存的水量位置 ，
為調製下一杯咖啡做準備 。 按鈕燈閃動3次來確定新水位 。