E Preparing To Brew; Adding Water - Cuisinart DGB650BCU Information Booklet

Hold stem in one hand. With your other hand, gently press the compartment door
down and pull outwards to flip open as shown above..
Place the filter in the holder and close the compartment cover; you will hear a snap
indicating filter is in place.
N.B. Caution must be used when inserting the charcoal filter. Improper placement in
the holder can cause tearing of the filter skin.
Hold the filter under cold running tap water for 10 seconds to flush. Hold the water
filter holder vertically, directly under the water stream so that the water flows through
the filter compartment.
Allow the filter to drain completely.
Replace the water filter holder into its opening on the inner wall of the reservoir,
pushing it all the way down to the base of the unit.
E Preparing to Brew
Before making coffee for the first time, we recommend operating the appliance once,
using only water, to remove any dust or residue that may remain in the system from the
manufacturing process.

Adding Water

Open the reservoir cover at the top of the appliance and pour in the desired amount of
water using the water level indicator . Close the reservoir cover ensuring not to exceed
the 10 cup capacity.
N.B. Do not exceed the 10 cup line. Doing so could cause the carafe to overflow.
N.B. Be careful to add only the amount of water for the number of cups you wish to
brew. The machine will use all of the water added regardless of the amount of coffee
used.
11