How To Detach The Stand And The Base - BenQ EW Series User Manual

How to detach the stand and the base

1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging
the power cable. Turn off the computer before
unplugging the monitor signal cable.
Protect the monitor and screen by clearing a flat open
area on your desk and placing a soft item like a towel on
the desk for padding, before laying the screen face down
on a flat clean padded surface.
Please be careful to prevent damage to the monitor. Placing
the screen surface on an object like a stapler or a mouse will
crack the glass or damage the LCD substrate voiding your
warranty. Sliding or scraping the monitor around on your
desk will scratch or damage the monitor surround and
controls.
2. Remove the monitor stand.
Release the screw(s) that fixes the stand to the monitor.
Then pull the monitor stand backward away from the
monitor.
To secure or release a screw, a flat-head screwdriver or a
coin is required.
Depending on the monitor size, there may be more than one
screw that fixes the stand to the monitor. The illustrations in
this document are for your reference only and may look
different from the appearance of the product.
3. Remove the monitor base.
Release the screw on the bottom of the monitor base
and detach the monitor base as illustrated.
In case you intend to use your monitor on the stand in the
future, please keep the monitor base, monitor stand, and
screws somewhere safe for future use.
16 How to assemble your monitor hardware
1
1
2
2