Sunbeam EM0430 Instruction Booklet page 8

Using your Sunbeam Burr Grinder (continued)
8. Plug the power cord into a 230-240V AC
power outlet and switch the power on.
9. Turn the power switch on the Sunbeam
Burr Grinder to 'ON', the switch will
illuminate, see figure 4.
Figure 4
Note: Ensure that the lid on the portion-
control container or grinding bowl is secure
and in place.
10. Push the 'GRIND' button for 2 seconds
and release. The Sunbeam Burr Grinder
will grind all the beans in the grinding
bowl, once empty it will then stop
automatically.
Note: Oily beans may stick together and not
feed into the burrs. This can cause the
automatic sensor to turn off the grinding
action. Should this occur, just tap the
housing of the Sunbeam Burr Grinder a few
times to loosen up the beans and push the
'GRIND' button again to resume grinding.
6
11. While still positioned in the grinder, tap
the ground coffee container a few times,
this allows the ground coffee to settle
down into the container. Now, slowly
remove the container from the Sunbeam
Burr Grinder, see figure 5. Before
removing the lid to the ground coffee
container, tap the container again a few
times to settle more of the ground coffee,
see figure 6.
Figure 5
Figure 6