Panasonic KX-HDV230 Manual page 13

The various telephone system functions (e.g. queues, timing, groups, etc.) can be configured on the
administration portal. For detailed configuration information, please refer to the administration
portal manual.
You can also configure the initial settings for the Panasonic telephone using the softkey "Setting"
"Application". The following functions are available after pressing "Application":
Call settings
Call waiting indication: define whether this function should be activated.
(optional, depending on settings on the administration portal) Timeout: set the ringing time.
(optional, depending on settings on the administration portal) Intercom: the intercom
function enables speaking directly to a linked extension through the system, without dial tone and
ring tone.
Caller ID block: set your entire number to be shown to the party being called, the switchboard
number to be displayed or all caller ID information to be blocked.
Call forwarding: activate the function Call forwarding
Parallel call: configure another telephone or your mobile phone to ring in addition to your
telephone when a call comes in. You can then answer the call with one of the two telephones.
Call forwarding: profiles
Here you can select your preconfigured call forwarding profiles.
For details, please refer to the Ncontrol manual.
You can edit the default profile directly via your device.
For details, please click here.
Telephone settings
Automatic redialling
Suggests number (if necessary, remove function)
Ring tone
Define as primary device
Logoff
Queues
13