Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for ION Xenon PJ-150
- Page 1 ION Xenon User Guide ION Xenon Portable Battery User Guide...
-
Page 3: Table Of Contents
Contents ION XENON AT A GLANCE _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Xenon overview Accessories Indicators GETTING STARTED _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _... -
Page 4: Ion Xenon At A Glance
ION Xenon User Guide Chapter 1: ION Xenon at a glance Xenon overview 1 l Power Input 5 l USB Port 1 2 l 4 Level LED Power Bar 6 l USB Port 2 3 l Status Indicator 7 l DC Output... -
Page 5: Accessories
ION Xenon User Guide Accessories The following accessories come with the Xenon portable battery: One (1) AC/DC power adapter One (1) 10Amp IEC power cable Indicators Each Blue LED on the 4 level power bar represents 25% of the total battery power available . -
Page 6: Getting Started
ION Xenon portable battery. Plug the 5.5mm / 2.1mm DC jack into the “DC IN” located on the ION Xenon battery. Once this has been done plug the 3 pin Australian plug into mains to charge the ION Xenon battery. - Page 7 ION Xenon User Guide To turn your ION Xenon battery On or Off press and hold down the power button for 3 seconds, the round status indicator will turn orange once on if there is no load attached. Attach a load / equipment to the USB ports or DC output.
-
Page 8: Basics
User Guide Chapter 3: Basics Start up Press the power button for three seconds to turn the ION Xenon battery on, the round Tri colour status indicator will light up orange if no equipment is attached. Indicators The ION Xenon blue LED power bar has four blue LED’s, each indicating 25% of the total battery power available. -
Page 9: Operating Modes
User Guide Chapter 4: Operating Modes Portable battery bank mode The ION Xenon acts as a primary power source when devices are connected to it while it is not connected to mains power. UPS Mode (Uninterruptable Power Supply) When the ION Xenon is connected to mains power and mains power fails the unit will act like a UPS and will turn on automatically supplying power to the connected devices. -
Page 10: Troubleshooting
ION Xenon User Guide Chapter 5: Troubleshooting General Suggestions PROBLEM POSSIBLE CAUSE REMEDY No LED Power Bar Not charged Using the provided AC/ Lights or Tri LED DC adaptor plug the Lights Xenon into mains to charge it up. LED Power bar... -
Page 11: Safety And Handling
PJ-150 or other property. Read all the safety information below before using ION Xenon PJ-150. Handling Handle ION Xenon PJ-150 with care. It is made of metal, and plastic and has sensitive electronic components inside. ION Xenon PJ-150 can be damaged if dropped, burned, punctured, crushed, or if it comes in contact with liquid. -
Page 12: Battery
The lithium-ion battery in ION Xenon should be replaced only by ION UPS Pty Ltd, and must be recycled or disposed of separately from household waste. Don’t incinerate the battery. -
Page 13: Support
Chapter 7: Support Contact details and warranty information The ION Xenon PJ-150 comes with a 12 Month warranty from date of purchase. For all support and warranty claims please contact ION UPS Pty Ltd via email or telephone technical support. -
Page 14: Specifications
ION Xenon User Guide Specifications Model PJ-150 Capacity 148Wh, 40,200mAh Power Display 4 level LED battery indicator Housing Black Aluminium housing 2 x USB for phones or tablets Outputs 1 x 19V 4.5A Max (via 2.5mm DC Jack) Built in short circuit, over charging and... - Page 16 ION Xenon User Guide info@ionups.com.au www.ionups.com.au Phone: 1300 700 805 International: +61 2 9096 2700...