Table of Contents
Advertisement
SECTION 1
6. Suspend/Resume Function
What Is the Suspend/Resume Function?
When this computer is suspended with the SUS/RES switch, the suspend/resume function retains
the programs and data in memory as it is that you can resume operations immediately the next time
you press the SUS/RES switch.
Critical Point
With resetting, the data in memory will be lost. Save the necessary data before resetting.
If you cannot reset through the following procedure, press down SUS/RES switch for 4 seconds
or more so that you can turn off the power of the PC unit. Then, wait for about 10 seconds and
push down SUS/RES switch again.
Windows XP
1
Click Start.
2
Click Turn Off Computer.
3
Click Restart.
4
The system will restart.
Windows Me or Windows 98
1
Click on Start -> Shut Down.
The Shut Down Windows dialog box appears.
2
Select "Restart" for Windows Me / Windows 98 and click on OK.
This PC unit is reset.
Critical Point
If you cannot reset through the above-mentioned procedure, you can reset as followings:
1 Push down the [Delete] key while pressing down the [Ctrl] and [Alt] keys.
When the Terminate Application dialog box appears, follow the instructions.
Window 2000
1
Click on Start -> Shut down.
The Shutdown Windows dialog box appears.
2
Select "Restart" and click on OK.
Critical Point
You can reset as followings:
1 Push down the [Delete] key while pressing down the [Ctrl] and [Alt] keys. The Windows
Security dialog box appears.
2 Click "Shutdown".
The Shutdown Windows dialog box appears.
3 Select "Restart" and click on OK.
This PC is reset.
22
Advertisement
Table of Contents
