Pendant Mount Installation
Required Tools and Materials
Small slotted screwdriver with 5/64" or 2 mm blade width — for connecting power when not using
l
Power over Ethernet.
Pendant wall mount (H4-MT-WALL1) or Pendant NPT Mount (H4-MT-NPT1)
l
(Pendant wall mount only) No. 2 Phillips screwdriver — for attaching the pendant wall mount
l
bracket to a mounting surface
(Pendant NPT mount only) 1-1/2" NPT-female to NPT-female pipe adapter — for attaching the
l
pendant NPT mount to a pipe
Silicone sealant
l
Package Contents
Ensure the package contains the following:
Note: The pendant wall mount and pendant NPT mount are sold separately.
Avigilon H5A Outdoor Dome Camera
l
T20 Pin-In star-shaped driver
l
Pendant Wall Mount:
Mounting template sticker
l
Mounting bracket
l
Thread seal tape
l
RJ-45 grommet piercing cap
l
Four screws and anchors for solid walls
l
Pendant NPT mount:
Mounting template sticker
l
Lock nut
l
Thread seal tape
l
RJ-45 grommet piercing cap
l
Installation Steps
Complete the following sections to install the device.
Pendant Mount Installation
39