Gas Leak Testing - Campingaz Camping Chef Folding Elite Manual

● Gas leak testing must be performed outdoors in a well ventilated area every time cylinder is connected
to stove.
● Always keep unit away from open flames, sparks or lit cigarettes.
● Never use a flame to check for gas leaks.
Watch for Bubbles
Stove Fitting

GAS LEAK TESTING

WARNING
Regulator
Gas Hose
5
Step 1
Assemble stove per "Assembly Instructions" on
page 4 of this manual. Make sure burner control
knobs ere in "OFF" position.
Step 2
Prepare a soapy water solution (one part
dishwashing liquid to three parts water) to test
for gas leaks in the connections. Apply a generous
amount of the soapy mixture to the regulator
assembly at the regulator, along entire length of
hose, and at the stove fitting (located on the right
side of stove).
Step 3
With the burner control knobs in the "OFF"
position, check for the bubbles where gas
cylinder attaches to regulator assembly, along
entire length of hose, and at stove fitting.
If soapy mixtures starts bubbling, gas is leaking
through the connections. Disconnect the gas
cylinder.
Retighten the connection that is leaking gas.
Repeat procedure with soapy mixture until gas no
longer leaks. NEVER USE A FLAME TO CHECK FOR
GAS LEAKS.
Step 4
Once all gas leaks have been sealed, WAIT AT
LEAST 5 MINUTES FOR GAS FUMES TO DISSIPATE
BEFORE LIGHTING THE BURNERS.
Carefully follow "Operating Instructions" to light
the burner and properly operate this unit.