Step 4 - Attach Exhaust Hose To The Exhaust Nozzle; Step 5 - Connect Exhaust Hose To The Air Conditioner; Step 6 - Complete Installation - GE GEP-09CA Installation And User Manual

NOTE: Some window installations may require the
extension panels to be trimmed.
3. Use one flat screw to secure the main panel to
the extension panel.
STEP 4 - ATTACH EXHAUST HOSE
TO THE EXHAUST NOZZLE
1. Grasp both ends of the exhaust hose and gently pull to
expand the hose.
NOTE: Do not attach additional hoses to extend the
length. This would decrease cooling efficien
may damage the air conditioner.
2.
Using a counterclockwise motion, attach the open end
of the exhaust hose to the exhaust nozzle.
a
b
c
STEP 5 - CONNECT EXHAUST HOSE
TO THE AIR CONDITIONER
IMPORTANT: When connecting the hose, the air
conditioner must be close enough to the window that
you will not dislodge the window seal plate. Once the
hose is connected, move the air conditioner 20" (51 cm)
from the wall.
1.
Align the notches on the connector end of the exhaust
hose with the ridges in the opening on the back of the
air conditioner.
2.
Using a counterclockwise motion, screw the exhaust
hose (connector end) into the air outlet located on the
back of the air conditioner.
and
A Exhaust Nozzle
Hose (open end)
B
C Hose (connector
end)

STEP 6 - COMPLETE INSTALLATION

Electrical Shock Hazard
Plug into a grounded outlet only.
Do not remove the ground contacts from the
power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire or electrical shock.
6
WARNING