Using The Foot Switch; Connecting The Foot Switch; Set The Functions To Use - Sony MCC-1000MD Instructions For Use Manual

System Operation Examples

Using the Foot Switch

You can connect the foot switch to the remote
contact switch connector 1 to 2 on the rear CCU
panel to use functions on this unit. You can
connect up to two foot switches.

Connecting the foot switch

Connect the foot switch to remote contact switch
connector 1 or 2 while the unit is turned off.
Caution
The FS-24 has an Ingress Protection rating of
IPX3. Therefore, do not operate it environments
exposed to splashing liquids (e.g., surgical
operating rooms).
For safety, use a device with a rating of IPX6 or
higher when operating in such environments.
Remote contact switch connectors 1 and 2
Connector specifications (stereo mini jack)
FS-24 Foot Switch

Set the functions to use

Set the functions to use with the foot switch.
For details on the function controlled by the foot
switch, see "[System] menu" (page 50).
1
Press the
The menu screen will appear.
2
In the [System] menu, select [Remote 1]
or [Remote 2] and press the ENTER
button.
When connected to remote contact switch
connector 1, select [Remote 1], and when
connected to remote contact switch
connector 2, select [Remote 2].
3
Select the functions to use with the foot
switch, and then press the ENTER
button.
4
When two foot switches are connected,
select functions to use with the second
foot switch as well.
5
Once settings are complete, press the
MENU button to close the menu
screen.
52
MENU button.