Address
Address 43
Address 44
Address 45
Address 46
3.
The process alarm hysteresis area is equivalent to the process alarm hysteresis
configuration in I/O parameter setting window as shown in the following figure.
Alarm type setting area of Rate Change alarm (address 47); RCA type
1.
If setting the bit as 1, Rate Change alarm type of a channel is set for the temperature
Rate Change alarm; if setting the bit as 0, Rate Change alarm type of a channel is
set for the temperature Rate Change alarm.
R200
Isolated Thermocouple Input Module TC4S User's Guide
September 2010
Description
CH 0 process alarm hysteresis setting area
CH 1 process alarm hysteresis setting area
CH 2 process alarm hysteresis setting area
CH 3 process alarm hysteresis setting area
Honeywell
5. Internal Memory
5.3. Operation parameter setting area
85